Challenger SA10
If you are researching to purchase a car lift, Challenger’s SA10 2-post car lift offers 10,000 lb. capacity. You can install the SA10 in either symmetric or asymmetric position, depending on your service needs. The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep.
Delivery
***You need to have a forklift available to unload the lift upon delivery.***
Specifications
Model
SA10
Lift Configuration
Symmetric Configuration
Lift Capacity*
10,000 lbs. (4536kg)
Rise Height 1
74.5" (1892mm)
Overall Height
136.5”
Overall Height (Cylinder Extended)
142.5"
2’ Height Extension Available
Yes
Overall Width
129” / 135”
Drive-Thru Clearance
92.75” / 98.75”
Floor to Overhead Switch
131.125” / 137.125”
Short Arm Reach
22.375” / 41.5”
Long Arm Reach 2 (min/max)
38.25” / 59”
Screw Pad Height
4.75” / 6.875”
Inside of Columns
106.75” / 112.75”
Motor
2HP, Single Phase, 60Hz
Voltage
208v - 230v
Speed of Rise
48 seconds
Max. Load per Arm
2,500 lbs. (1134kg)
Ceiling Height Required
12 (3658mm)
Specifications subject to change without notice or liability.
